Open Job Assignments Database

Current Open Assignments:

Substation Relay Technicians
Technical Diagnostic Services is consistently staffing substation relay technicians in Florida. Must have thorough knowledge of three phase relay testing procedures. Doble ProTest experience required. SCADA experience preferred. These positions involve the testing and maintenance of various substations throughout the state. Long term assignment with good rotation for travel home.

Please email a copy of your resume with Relay Technician in the subject line if you are interested in this position.

_________________________________________________________________________

Technical Diagnostic Services frequently has many open assignments in the Utilities and Petrochemical fields throughout the world. These requests for staffing often come on an expedited basis and must be filled with short notice. We regularly receive resumes from qualified candidates and encourage you to send us an updated copy of your resume when you are available, as the next assignment may come at any time. These are a few examples of the technician positions we frequently staff.

Relay Test Technicians
Protective relay technicians with hands on experience.
Review elementary one-line diagrams and control wiring diagrams.
Perform wire check out and point to point wire tests.
Perform relay commissioning on solid state and microprocessor utility relays.
Configure solid state and microprocessor relays with settings files.
Verify solid state relay and microprocessor wiring and configuration.
Troubleshoot solid state and microprocessor relay system.
Verify overall utility relay protection scheme matches original elementary protection scheme design. Verify circuit integrity by applying AC or DC current and simulating system functions.
Experience with 3 phase relay test set (Pulsar, Megger, Manta, or Doble).
Perform testing on line traps, CCVT’s, BCT’s.
Experience testing CT’s, PT’s, and other equipment associated with protection schematics.
Experience with the following manufacturers’ relays:
Schweitzer Engineering Labs [SEL321, SEL421, SEL311, SEL451, SEL351, etc.]
GE Utility relays [L60, L90. D60, D30, Multilin 750, Multilin 469, etc.].

Instrument and Controls Technicians
Demonstrated competency in analog and digital process control loop and instrument maintenance repair and troubleshooting.
Sound fundamentals in the use of measuring and testing equipment consistent with I/C scope of work. Thorough understanding of electrical equipment operation, electrical equipment maintenance requirements and maintenance restrictions imposed by safety and environmental regulations. Able to perform corrective and preventative maintenance on facility systems, equipment, and components, such as instrumentation, control circuits, pressure and temperature indicators, PLC’s, motor control centers, motors, HVAC units, and control and power circuits. Will utilize blueprints, drawings and specifications in locating and diagnosing trouble in electrical equipment, control circuits and power systems.

Mechanical Maintenance Technicians
The methods, tools, materials, and equipment used in the maintenance, construction, repair, and operation of complex mechanical equipment, such as pumps, motors, multi-reduction gearboxes, hydraulic drives, gas and steam turbines, boilers, etc.
Chain and socket assemblies, gas compressors, electronic, pneumatically and hydraulically controlled valves, chemical handling. Lubrication requirements of pumps and motors.
Principals of operation of pumps, motors, valves, and associated equipment.
Working knowledge of precision tools.

Electrical Maintenance Technicians
Experienced with repair, maintenance & testing of low, medium and high voltage electrical apparatus, including but not limited to: Motors, Circuit Breakers, Distribution Transformers, and Power Transformers. Experienced with Electrical Test Equipment, such as: High Potential Test Set, Doble Power Factor Test Set, Low Resistance Measurement Test Set, Transformer Turns Ratio Test Set. Experience with proper use of power tools, drill press, bad saw, hand grinders and air tools. Ability to read and understand & interpret instruction books, wiring diagrams & schematics and company procedures.

UPS Startup Technicians
Technical Diagnostic Services is looking for technicians to travel around the country doing UPS startups and maintenance. These are medium voltage battery UPS systems. Specific equipment training provided. Must have thorough understanding of electrical theory, ability to read an oscilloscope, and comfortable performing a small amount of electronic board troubleshooting. Prefer candidates with electrical training certification from an approved school, and UPS experience. This is for a long term assignment. Each project lasts approximately two months. Meal allowance and housing expenses covered. Good pay. If you are interested, please submit an updated resume to jobs@technicaldiagnostic.com. Use UPS STARTUP TECHNICIAN as the subject line.

Nuclear Plant Scheduler / Consultant
Technical Diagnostic Services is looking for a consultant with a strong knowledge of nuclear plant operations. This position will be responsible for showing the client how to create an integrated critical path schedule. Perform "what-if" scenarios, educate the client how to interpret data, analyze, and determine problem factors. This position will travel to different sites throughout the country instructing customers on plant data. If you are interested, please submit an updated resume to jobs@technicaldiagnostic.com. Use NUCLEAR PLANT SCHEDULER / CONSULTANT as the subject line.

if you would like more information about any of these opportunities please send an email to staffing@technicaldiagnostic.com.